Frequently Asked Questions

To determine if this seat suspension kit fits your application, you will need to measure the bolt pattern on the bottom of your seat (the bolts attaching the sliding tracks to the seat, not the bolts attaching the sliding tracks to the mower, these measurements will be different). The measurement needs to be 11.5 inches front to rear and 10.69" ‪to 11.25” or 9.50” side to side for the suspension kit to work. ‬‬‬‬‬

The suspension kit mounts between the seat and the sliding tracks. Your mower needs to have sliding tracks for this suspension to function. (Otherwise, you will have to incorporate 3/4" spacers and longer bolts for the suspension to function properly.)   

The kit is 2.75" inches tall and will handle weights up to 286 lbs. If you do not have slide rails, it will raise your seat up about 3.50" once you have the spacers under the unit. 

Also, you need to check your seat safety switch. If your switch protrudes beneath the bottom of the seat, you will need to use spacers between the seat and the suspension kit as well. 

Check out these two reviews to help with the decision. 

• ProRide: https://www.aconcordcarpenter.com/trac-seats-proride-suspension-seat-review.html
• Suspension Kit: https://www.aconcordcarpenter.com/trac-seats-seat-suspension-kit.html

We ship same day for orders placed before 2:00pm Central. Average delivery time is 1-4 days depending on your location. 

Our suspension seats have a 1-5 year suspension warranty. We stand behind our products. If you have any issue, please contact us and we will take care of it.